Purchasing your own private tub would probably be the most luxurious investment that you can make. It is a must to keep your tub properly maintained at all times. Hot tub parts should be regularly checked in order to keep the tub running at optimum performance. Replacement should be made immediately, if you find any worn out parts which needs to be replaced. This is to prevent further damage to other parts of the tub.
What to check for on your tub
A modern hot tub would include a pump, a heater, filters, and a control system. Some tubs are manufactured with jets for the purpose of hydrotherapy. These are the most important parts of a hot tub that helps the tub run at optimum performance. If ever one of these significant spa parts needs to be replaced, a great difference its performance can be easily noted.
Hot tubs parts and their designated function
One of the most important part of a hot tub is its “Pump”. The hot tub pump parts act like a human heart that circulates water in the tub. Some tubs have only one pump, but others may have more than a single pump which also depends on the size of a particular tub. The part is also responsible for operating jets and filtering water. The pump runs at high speed when it controls jets, while it runs at low speed when it filters the water that circulate around the tub.
Another vital part of a hot tub is the “Control”. This part is also called as the “Spa Pack”, which is responsible for making every part of the tub work well with each other. Users can easily control and adjust processes such as, water temperature, lights and the Ozonator. The control can function even with the use of outdoor tubs such as portable hot tubs. Without a control, the whole tub would not work well.
Next is the hot tub’s “Heater”. Of course, this Leisure bay hot tub parts is responsible for regulating water temperature. A heating element is present on the heater which brings water to a desired level of temperature as it circulates the tub. The hot tub’s water temperature should not go beyond 104oF in order to avoid dehydration or burnt from too much heat.
And of course, we wouldn’t want to forget the filter as one of the most special hot tub replacement parts. The filter plays a major role in filtering foreign substances and keeping the water clean. Before, chemicals were added directly to the tub’s water to help the tub eliminate minute contaminants and bacteria that cannot be filtered by the part. But, with years of research and development, manufacturers have found a way to reduce the use of harmful chemicals to maintain water’s purity. A new filter is introduced which is called “The Ozonator”. This new part easily filters impurities and dirt present in the tub’s water without the need of harmful chemicals. These hot tub filters use different kind of light which then generates ozone. The ozone would then be injected to the spa which eliminates organic materials to clean the tub.
Last, but not the least, would include the hydrojet (also commonly called as “Jet”), the cabinet, the blowers, and the hot tub lights. These spa parts are also significant in providing comfort and satisfaction to every user. The hydrojet is a nozzle which draws air and create bubbles. It has actually the same function as the blowers, but blowers are used in older hot tub models.
It is a must to regularly check parts of your tub. This would help you make your hot tubs run at optimum performance and ensure that the tub’s life would last longer. As stated above, one defective part may lead to risking other hot tub parts. You might as well as try visiting your nearest spa parts depot and replace the worn out hot tub spa parts as soon as possible to avoid making bigger problems on the hot tub’s condition.